HandyTone -286 Reset Factory Default (Password Recovery)

HandyTone -286 Reset Factory Default (Password Recovery)

If you have this device the default password is admin, but if it doesn’t work you should go through this steps and be aware that this process delete all old configuration of device and I’m not responsible for this.

1- First of all disconnect network cable and turn off device then turn it on

2- Find the MAC address of the device it may be on the bottom of it.

3- replace the mac address using this mapping:

0-9: 0-9

A: 22

B: 222

C: 2222

D: 33

E: 333

F: 3333

For example, if the MAC address is 333b4444e555, it should be encoded as

"3332224444333555".

4- Pick up the phone:

a. Press "***" or the LED button  

b. Enter "99" and get  "Reset" message (if you don’t hear this, it may be because of your provider they set lock keypad update to yes so there is no way to reset the device)

c. Enter the encoded MAC address of the device.

d. Wait for 15 seconds.

The device will reboot automatically and restore to factory default setting.

Zyxel IES 6000 DSLAM Series Commands

Zyxel IES 6000 Series Commands:

Set IP Address :

DSLAM> ip set inband 10.32.32.130/25 2 10.32.32.129

usage: set inband <ip>[/<netmask>] [<inband-vid> <gateway-ip>]

  <inband-vid> : inband management vlan id

  <gateway-ip> : default gateway ip

Creating Management Vlan :

DSLAM> vlan set 2 all normal untag

DSLAM> vlan set 2 enet5 fix tag

DSLAM> vlan  name 2 management

usage: set <vid> <giga-port> fix|forbid|normal tag|untag

Creating Access Vlan :

DSLAM> vlan set 11 all normal untag

DSLAM> vlan set 11 enet5 fix tag

DSLAM> vlan  name 11 Access

usage: set <vid> <giga-port> fix|forbid|normal tag|untag

Creating Profiles :

DSLAM> profile adsl set 220 512 2048

usage: set <profile> <us-max-rate> <ds-max-rate>

Removing PVCs:

DSLAM> port pvc delete *-*-0/33

usage: delete <slot-port-vpi/vci>

Creating and assigning new PVC s

DSLAM> port pvc set 1-1-0/35 DEFVAL llc 11 0

usage: set <slot-port-vpi/vci> <profile> <mux> <pvid> <priority>

             <slot-port-vpi/vci>: example: 3-1-0/33, 3-1~10-0/33, 3-*-0/33, *-*-0/33

             <profile>          : atm profile

             <mux>              : encapsulation: llc, vcmux

             <pvid>             : default vlan id, 1~4094

             <priority>         : default priority, 0~7

Assigning Profile to port:

DSLAM> port adsl set 1-1 220 auto

usage: set <slot-port> <profile> <mode>

Activate the first port:

DSLAM> port enable 1-1

usage: enable <slot-port>

Copy first port configuration to others:

DSLAM> port copy 1-1 1-*

DSLAM> port copy 1-1 2-*

DSLAM> port copy 1-1 3-*

DSLAM> port copy 1-1 4-*

.

.

.

usage: copy <source> <destination>

<source>      : source port, example: 3-3, 4-26

<destination> : destination ports, example *-*

Copy first port configuration to a range of ports:

Copy first port (PVC,Profile) to range:

DSLAM> port copy 1-1 1-47~56

usage: copy <source> <destination>

<source>      : source port, example: 3-3, 4-26

  <destination> : destination ports, example 1-1,3~5,10~15

Activating TR101:

DSLAM> acl pppoeagent set 11

usage: set <vid>

DSLAM> acl pppoeagent enable 11

usage: enable <vid>

DSLAM> acl pppoeagent optionmode 11 tr101 vid on

usage: optionmode <vid> private|tr101 [vid on|off]

Activating Antimacspoof  :

DSLAM> acl antimacspoof enable

DSLAM> acl pktfilter set *-* pppoe-only

usage: set <slot-port> <type>

  <type>     : can be accept-all, pppoe-only, or any combination of

               ip, arp, dhcp, eapol, pppoe, netbios, igmp seperate by a space

  pppoe-only : accept pppoe packet only

  accept-all : accept all packets

show commands:

SNR:

DSLAM> show linerate 1-1

payload rate   (kbps)=        509       4095

actual rate    (kbps)=        519       4141

attainable rate(kbps)=       1322      22284

noise margin     (dB)=       31.8       29.3

attenuation      (dB)=       12.4       22.0

Stat:

DSLAM> show linestat 1-1

                    usPayLoadRate dsPayLoadRate

port  link              (kbps)        (kbps)    protocol       up time

----- ------------- ------------- ------------- -------------- --------------

 1- 2 up                      509          4095 adsl2plus         2d 2h53m 6s

Long Test:

DSLAM> diagnostic selt test 1-1

DSLAM> diagnostic selt show 1-1

port     inprogress       cableType loopEstimateLength

----- -------------------- --------- ------------------

 1-1           INPROGRESS     24AWG    1004 m(3.29 kFt)

Profile:

DSLAM> profile adsl show

adsl profile(s):

----------------------

1. 210

2. 220

3. DEFVAL

DSLAM> profile adsl show 220

max rate      (Kbps):      512        2048

  min rate      (Kbps):       64          64

  latency delay   (ms):       20          20

  max margin      (dB):     31.0        31.0

  min margin      (dB):      0.0         0.0

  target margin   (dB):      6.0         6.0

  sra mode            :  startup     startup

  up shift mgn    (dB):      9.0         9.0

  down shift mgn  (dB):      3.0         3.0

PVC:

DSLAM> port pvc show 1-1

pvc               type   mux   pvid  pri  mvlan profile

--------------- ------- ----- ------ ---- ----- ------------------------------

1-1-0/35        bridged  llc     11    0   -   DEFVAL

Vlan:

DSLAM> Vlan show

vid  uplink            12345678901234567 name

----- ----------------- ----------------- -------------------------------

    1 FFFFFFFF/UUUUUUUU XXXXXXX XXXXXXXXX 1

    2 ----F---/UUUUTUUU XXXXXXX XXXXXXXXX Management

  11 ----F---/UUUUTUUU FFFFFFF FFFFFFFFF Access

Line Card:

DSLAM> lcman show

48V power: Input-A up, Input-B up

id state    card type          uptime f/w version         heat vol mon down out

-- -------- ----------- ------------- ------------------- ---------------------

 1 active   ALC1272G-51  146:01:35:18 V3.95(ARV.0)          -   -   -    -   -

 2 active   ALC1272G-51  146:01:35:15 V3.95(ARV.0)          -   -   -    -   -

 3 active   ALC1272G-51  146:01:35:14 V3.95(ARV.0)          -   -   -    -   -       

DSLAM> lcman reset 1

usage: lcman reset <slot>